Product - YEDE by marbb Home Nano-Bubble Shower
Continue the excitement of marbb right at home
We want to bring the same wonderful experience of marbb that our salon guests have enjoyed right into your home. As one way to continue the marbb experience we envision, we are pleased to introduce our home care series: the "YEDE by marbb" nano-bubble showerhead.
Moving ultra-fine bubbles
Fine bubbles are bubbles with a diameter of less than 0.1 mm (100 μm). Bubbles even smaller than 0.001 mm (1 μm) are called ultra-fine bubbles (nanobubbles).
YEDE by marbb produces ultra-fine bubbles measuring just 0.0001 mm (0.1 μm). Simply by replacing your bathroom showerhead, you can easily enjoy the benefits of nanobubbles right in your own home.
The power of ultra-fine bubbles that reach every pore
Ultra-fine bubbles of 0.0001mm penetrate pores and wash away dirt from skin and scalp.
By improving your scalp environment, your hair will gain firmness, resilience, and volume, leading to a reduction in scalp oil odor and age-related odor.
We confirmed that the rate of increase in hair moisture content (hydration) was approximately 3.3 times higher when using a combination of marbb and CLOFF compared to tap water.
Soaked in warm water adjusted to approximately 40°C for 20 minutes and dried. Hair was measured with an infrared moisture meter before and after soaking.
Product Overview
- Product name
- YEDE by marbb
- Form
- YDM-2320-01
- Size
- Width 67mm, Depth 75mm, Height 207mm
- Weight
- Approximately 175g
Frequently Asked Questions
Can it be installed on any shower hose manufacturer?
It is compatible with common shower hose manufacturers sold in Japan. In some cases, you may need to use the included adapter. Please check your current product first.
Supported manufacturers
TOTO, LIXIL (INAX), SAN-EI, KAKUDAI, MYM, KVK, Gaster
Please use the "M" adapter for MYM, the "K" adapter for KVK, and the "G" adapter for Gaster.
To customers using KVK hoses:
If you install it without the adapter, the shower head and hose will not be securely fixed and may come off. Please install the adapter labeled "K" before use.
Some KVK shower hoses do not require an adapter (thread size G1/2). First, attach the included adapter, then install the shower head. If it does not fit, the adapter is not needed.
Unsupported manufacturer
Rinnai, Noritz
Cannot be used with a balanced flue bathtub heater (a type where the water heater and shower are integrated and installed next to the bathtub).You may be burned.
Can it be used in areas with low water pressure?
YEDE by marbb requires a water pressure of at least 0.15 MPa to generate nanobubbles.
How to measure at home
Please fill a 2L plastic bottle with hot water from the spout of the faucet attached to the bathtub. If it fills up in approximately 10 seconds, you can consider the water pressure to be sufficient.
Do I need to replace the cartridge?
Cartridge replacement is not necessary.
Is it okay to immerse the shower head in the bathtub?
Yes, it’s fine. YEDE by marbb is equipped with a “μ-Jet mechanism” that does not draw in outside air, so it generates nanobubbles even when submerged in the bath. You can enjoy a nanobubble bath. It also helps keep the water warm longer (heat retention), which is why we’ve received positive feedback from people who tend to feel the cold.
How do I clean a shower head?
The shower head can be easily cleaned by removing the ring-shaped part called the decorative ring. Simply clean the inside of the spray plate with a toothbrush and neutral detergent. After finishing, reinstall the packing, shower plate, and decorative ring. Cleaning it once every six months to a year is recommended.
- For inquiries or to request materials regarding marbb, please contact us here.